Rich Packing NJP 400C Capsule Filling Machine

Rich Packing NJP 400C Capsule Filling Machine

Do you know the process of using the capsule filler machine? During the filling process of hard capsules, the vacuum separator of the vacuum system of the capsule filler machine mainly sucks the capsules into the upper and lower modules, and separates the cap body. The vacuum separator moves up and down once at each position of the machine's rotating disk, and the machine shaft rotates once. The filter of the vacuum system should be opened periodically to remove clogged dirt to ensure adequate vacuum in the vacuum system.

The clutch of the capsule filler machine is the safety protection of traditional overloading. When the clutch does not slip, the load is normal, but it may slip due to long-term use. When the clutch slips in normal use, the nut round head may be tightened to ensure the normal operation of the machine. operation, to achieve the purpose of protection.

It is recommended to check the delivery current of the capsule filler machine once a week and add appropriate amount of grease. If necessary, tighten again. When the current is too large, the voltage of the runner adjustment device needs to be switched, but the chain cannot be pulled nor can the chain leave the sprocket, so as not to affect the sequence of the entire motion mechanism and prevent the motion mechanism from intervening.

If the capsule filler machine works in an orderly manner for a long time, it is necessary to regularly clean the places that are in direct contact with the medicine.

***  Technical parameter