DPP 160R Medical Using Blister Packing Machine
The heat sealing station of DPP 160R plays an important role in the Alu PVC Blister Packing Machinery. It will balance the pressure and make the product’s aluminum foil lubricated without any wrinkles. The heat-sealing working station also has the double cylinder and the dual-axis linkage, and its function is very pressure balance. The heat-sealing stations also have four columns, that are more stable and could also make the operation of the aluminum plastic machinery much more stable.
Fully auto flat aluminum-plastic packaging machine is the primary machinery for sub-packing pills tablets and capsules. For its direct contact with the appearance of the pill, its cleaning procedure directly affects the quality and the quantity of the pill. After cleaning, wipe all the parts and equipment surfaces with super pure water, and then wipe and disinfect with 75%.
If the PVC Alu Blister Packing Machinery have not been used within one week after being cleaned, the strict production requirements suggest that the plastic aluminum packaging machine should be scrubbed clean from the scratch with a damp cloth, and then wiped and disinfected with 75% ethanol before subsequent working can be carried out.
*** Technical parameter
Model |
DPP-160 |
Blanking |
20~50 times/min |
Production Capacity |
1200-4200 plates/h |
Max. Shaping Dia. And Depth |
|
Standard Travel Range |
40~110mm |
Standard Plate |
80*57mm |
Power of Main Motor |
1.5kW |
Total Power |
3.78kW |
Power |
380V/220V/50Hz |
Vacuum |
0.4MPa-0.6MPa |
Noise |
<75dBA |
Thickness and Width of PVC |
|
Thickness and Width of PTP |
|
DialyzingPaper |
50~100g*150mm |
Mold Cooling |
Runing water or circulating water |
Weight |
|
Overall Size of Machine |