-
Replacing The Dosing Plate And Filling Rod Of The Capsule Filling Machine
Oct 10 , 2021
1. Loosen The Fastening Screw Of Capsule Filling Machine To Raise The Powder Hopper With Spring Force; 2. Use A Vacuum Cleaner To Remove The Remaining Powder In The Medicine Pool Ring; 3. Use The Handle To Move The Main Engine To Make The Punch Seat At The Highest Position; 4. Loosen And Remove The Cap Nut, Turn The Knob Clockwise To Raise The Pressure Plate And The Filling Holder And Lift It Off;...
Read More
-
The First Use Of Blister Packaging | Richpacking020.com
Oct 14 , 2021
The first blister package of the blister package machine is mainly used for pharmaceutical packaging. In order to restrain the convenience of taking bottled medicines such as glass bottles and plastic bottles in advance, the large investment in packaging production lines and other defects. In addition, the necessary amount of dosage packaging and small tablet packaging has become larger and larger...
Read More
-
Operation Sequence Of Blister Packaging Machine | Richpacking020.com
Oct 14 , 2021
1. Prerequisites before the blister packing machine running: the previous production cleaned the room, and the indoor temperature and humidity were acceptable. The personnel shall pass the sanitary attire. The mechanical form is normal. 2. Preparation before blister packaging: Before packaging, prepare hard tablets, aluminum foil, and APIs (such as powders and granules) that are suitable for this ...
Read More
-
Annual Maintenance Plan For Blister Packaging Machine
Oct 14 , 2021
1. Check whether the electrical connectors in the electrical cabinet under the blister packaging machine are loose. 2. Check whether the power supply voltage of the equipment meets the requirements for the power-on status of the electrical components. 3. Observe whether the temperature controller on the operation panel of the electronic system is working properly. 4. Check the inside and outside o...
Read More
-
The Functions Of The Automatic Capsule Filling Machine
Oct 14 , 2021
The fully-active capsule filling machine has the functional characteristics of the more advanced predecessors in the world. The fully-active capsule filling machine is a standardized series. It is easy to change the mold and have to exchange clean tools. The fully-active capsule filling machine uses a high-precision, low-vibration, Noisy operation, less than 70 decibels of activity noise, the diff...
Read More
-
Milk Tablets Blister Packaging
Oct 21 , 2021
Milk flakes, as a deep-processed product of milk, are made by pressing milk powder, plant creamer, whey protein powder, sucrose, etc., and are a kind of nutritious instant snacks. At present, 90% of milk tablet packaging uses a flat blister packaging machine, which plays an important role in storage and transportation. Milk tablets are rich in protein and fat. If stored improperly, they are prone ...
Read More
-
Testing Requirements For Blister Packaging
Oct 24 , 2021
Testing requirements for blister packaging machine The primary packaging tool of blister packaging is solid medicines. The packaging should isolate the contained pharmaceutical preparations from the outside world, on the one hand, to avoid the volatilization, escape and leakage of the active ingredients of the medicine. Volatile pharmaceutical ingredients can ablate on the inside of the packaging ...
Read More
-
Blister Packaging Sealing Material
Oct 28 , 2021
The sealing materials (also called lid materials) for pharmaceutical blister packaging in China all use aluminum foil (PTP aluminum foil) with a common thickness of 0.02mm, which requires mold-free, corrosion-resistant, impermeable, solar heat, moisture-proof, light-blocking and high-temperature extinction. The performance of bacteria. Looking at the international PTP packaging market and the deve...
Read More
-
The Problem Of The Splicing Table Of The Blister Packaging Machine
Oct 28 , 2021
The splicing table of the blister packaging machine is the docking station for PVC. At the same time, the splicing table has two cylinders to control the release and shutdown protection of the PVC. When the clamping cylinder is released, the forming step is pulled; when the clamping cylinder clamps the PVC Then the forming traction reaches the end of the traction; the third function of the splicin...
Read More