-
How To Adjust The Cam Of Blister Packing Machine?
Aug 04 , 2022
What is the installation sequence of the valve cam of the blister packaging machine on the shaft? First, from the inside to the outside, it is the traction and clamping cylinder cam, the back-stop cylinder cam, the forming blowing cam and the forming cylinder cam. When the return position of the heat sealing cam linkage heat sealing mold is very low, the valve cam is installed according to the pos...
Read More
-
How To Properly Lubricate And Maintain The Tablet Press
Aug 04 , 2022
How to properly lubricate and maintain the tablet press requires more attention: (1) The lubrication of the friction surfaces of the moving parts of the rotary tablet press is an important link to ensure the normal operation of the machine and prolong its service life, especially if the main moving parts run dry in the absence of oil, they will be quickly damaged and cannot be used. . (2) Before u...
Read More
-
How To Correctly Order Dies For Tablet Press?
Aug 04 , 2022
How to correctly order the punching die of the tablet press, in order to enable the pharmaceutical factory users to better order the appropriate punching die, it is recommended that the pharmaceutical factory user can fully discuss with the punching die pharmaceutical manufacturer to reduce possible production problems. 1. Due to some characteristics of rail design and processing technology, it is...
Read More
-
How To Maintain The Components Of The Blister Packaging Machine
Jul 29 , 2022
How to maintain the components of the blister packaging machine The forming die roll, forming template, film pulling roll, sealing template, sealing roll, feeding roll, etc. of the blister packaging machine are important components of the blister packaging machine, and special attention must be paid to cleaning and maintenance during storage and use. Contact with acid, alkali or other corrosive su...
Read More
-
Mould Replacement And Synchronous Adjustment Of Blister Packaging Machine
Jul 29 , 2022
Replacement of blister board-mounted molds: When the packaging shape changes, that is, when the quantity, size, variety and specifications of the packaging plate change, the molds and corresponding parts need to be replaced. The general steps for replacing the mold and the corresponding parts are: turn off the heating switch, cut off the water and gas sources, and turn all the switch knobs to the ...
Read More
-
Mechanism Improvement of Capsule Filling Machine
Jul 29 , 2022
Mechanism Improvement of New Capsule Filling Machine The indexing turntable device of the capsule filling machine includes a rotating frame, a lifting and radial telescopic mechanism, an upper module and a lower module. The rotating frame is connected with the output shaft of the indexing box, and the lifting and radial telescopic mechanism is arranged in the rotating frame. The upper modules are ...
Read More
-
Tablet Press Die Material
Jul 29 , 2022
Tablet press die material The punching die is an important supporting part of the tablet press. The punch and the middle die of the traditional tableting machine are made of steel. During the tableting process, friction will occur between the powder and the die wall and the upper and lower punches. This friction will reduce the transmission of the axial and radial forces of the powder, resulting i...
Read More
-
Features Of The Drive Of The Punch Table Of The Tablet Press
Jul 29 , 2022
The punching table of the tablet press produced by our company is directly driven by PLC control, there is no friction of mechanical parts, no heat generation or component wear. The pressure is directly measured by the gravity of the upper and lower molds. The core gravity sensor is installed just below the center of the pressure roller, which can withstand a maximum pressure of 30t. The advantage...
Read More
-
Technological Progress Of Tablet Press Machinery High-Speed
Jul 22 , 2022
With the continuous and the rapid developing of China's social economy and the GDP, pharmaceutical manufacturer have also developed intensively. So, in order to meet the needs of the pharma field industry, the original old type presses with an output of only 20,000 to 50,000 one hour can no longer meet the needs of the market. So , Guangdong Rich Packing Packing Machinery Co., Ltd. has accumulated...
Read More
-
The Market Demand Of Capsule Filling Machine
Jul 22 , 2022
Our capsule filling machine automatic of Guangdong Rich Packing Packaging and Pharma Machinery Co., Ltd. has accurate filling dosing, flexible action, the novel structure and convenient operating. It is an economical and the practical pharmaceutical capsule filling machinery in the whole large pharma factory at present. The developing of the automatic trend of capsule filling machine is an very im...
Read More