-
Requirements For Blister Packaging Materials
Nov 09 , 2021
The blister packaging manufactured by the blister packaging machine is directly in contact with the drugs, and some require a longer period of drug storage. The quality of the pharmaceutical packaging is directly related to the quality of the drugs, and involves personal health and safety. Therefore, the requirements for medical packaging are very strict, including the following points: (1) The pa...
Read More
-
Application of PLC Control in Blister Packaging Machine
Nov 19 , 2021
The traction part of the capsule blister packaging machine is controlled by PLC. The calculation shows that the working stroke of the cam at the blister forming part and the heat-sealing part is; the stroke movement time is 0.5 seconds, the far rest time is 1.5 seconds, the return movement time is 0.5 seconds, and the near rest The time is 0.5 seconds. When the forming and heat sealing part of the...
Read More
-
The Trend of Blister Packaging Equipment
Nov 19 , 2021
Our country is a developing country with a large population. National conditions determine that most of our pharmaceutical companies' blister packing machine products are produced in large quantities. In addition, domestic pharmaceutical companies that survive the gradual survival of the fittest in recent years must have their own core products. Under normal circumstances, the output of core produ...
Read More
-
Working Principle And Application Scope Of Automatic Electronic Counting Machine
Nov 26 , 2021
With the widespread application of automation in various industrial fields, many things have been machined and streamlined. The bottling and production of products such as "capsules, tablets, medicines, health products, and candies" is no exception by automatic counting machines. Operation, what type of machine is the counting machine and how does it work? Counting materials are needed everywhere ...
Read More
-
Maintenance Items Of Vacuum Pump For Blister Packing Machine
Nov 26 , 2021
Before the blister packaging machine working, the inlet pipe valves should be closed at first, so that the vacuum pump can run for over 15 minutes under the ultimate pressure state. This way can effectively extract the water pump in the gas. The motors should not be stopped and started frequently (the times is less than 6 time in one hour). (Notice: When the vacuum pumps are running normally, the ...
Read More
-
The Solution To The Powder Leakage Of The Tablet Press
Nov 26 , 2021
The maintenance method of the rotary tablet press machine is specifically: the tablet press machine manufacturer needs to check the machine itself and parts regularly, basically check the turbine, bearing, compressor, crankshaft, upper and lower rail guides, etc., and solve the problem in time to avoid affecting the machine. In normal operation, after each use, you need to clean the remaining powd...
Read More
-
The Principle And Working Process Of Tablet Pressing Mechanism (2)
Dec 03 , 2021
In the dosage control of the tablet press, the action principle of the specific feeder also has a considerable influence. For example, when the particles rely on their own weight, when they roll freely into the middle die hole, the filling condition is relatively loose. If multiple forced feeding methods are used, the die holes will be filled more, and the filling situation will be denser accordin...
Read More
-
Material Device Of Blister Packaging Machine
Dec 08 , 2021
Flat-plate aluminum-plastic blister packaging machine aluminum-plastic reel: sentence includes two parts: aluminum foil reel and plastic film reel. The reel is mainly composed of a cylinder, an inner and an outer stator, a brake ring, and an adjusting nut. The two ends of the cylinder are supported on a supporting shaft with rolling bearings, which are the rotating parts of the reel. When the plas...
Read More
-
Analysis Of The Advantages And Disadvantages Of Automatic High Speed And Low Speed Tablet Press (1)
Dec 08 , 2021
For enterprises, when purchasing the selection of press, they will consider the high yield energy of press, small tablet accuracy error, high automation requirements of press equipment requirements, has automatic function, reduce employment, to optimize the production environment to reduce the production cost and high production efficiency to buy their own needed press products. Facing the differe...
Read More