-
Part One Of The Operation Of The Blister Packaging Machine | Richpacking020.com
Sep 10 , 2021
This Article Will Bring The Installation Of Pvc Rigid Sheet And Aluminum Foil Roll Of Blister Packaging Machine For Rich Packing Customers: Remove The Compression Nut And Stop Sleeve On The Film Reel, Put The Pvc Hard Film Or Aluminum Foil Roll On The Adjustment Sleeve, Install The Stop Sleeve And The Compression Nut And Tighten The Compression Nut To Make The Film Roll On The Adjustment Sleeve It...
Read More
-
Capsule Filling Production Equipment
Sep 24 , 2021
In the capsule filling production process of preparing capsules, the filling of drugs is the most important step. 1 Disposal of drugs ①Small-dose medicines or fine medicines can be directly broken into fine powder, passed through a No. 6 sieve, and filled after mixing. ②A large dose of medicine can destroy part of it into fine powder, and other medicinal materials are extracted into a thick ointme...
Read More
-
Protection And Liquidation Of Semi Automatic Capsule Filling Machine
Sep 29 , 2021
Protection and liquidation of semi automatic capsule filling machine 1. When the capsule filling machine is in normal operation for a long time, the parts that are directly in contact with the powder should be cleaned regularly or according to the operating conditions; 2. The idea transmission mechanism at the lower part of the capsule filling machine panel should dispose of oil pollutio...
Read More
-
Replacing The Dosing Plate And Filling Rod Of The Capsule Filling Machine
Oct 10 , 2021
1. Loosen The Fastening Screw Of Capsule Filling Machine To Raise The Powder Hopper With Spring Force; 2. Use A Vacuum Cleaner To Remove The Remaining Powder In The Medicine Pool Ring; 3. Use The Handle To Move The Main Engine To Make The Punch Seat At The Highest Position; 4. Loosen And Remove The Cap Nut, Turn The Knob Clockwise To Raise The Pressure Plate And The Filling Holder And Lift It Off;...
Read More
-
The Functions Of The Automatic Capsule Filling Machine
Oct 14 , 2021
The fully-active capsule filling machine has the functional characteristics of the more advanced predecessors in the world. The fully-active capsule filling machine is a standardized series. It is easy to change the mold and have to exchange clean tools. The fully-active capsule filling machine uses a high-precision, low-vibration, Noisy operation, less than 70 decibels of activity noise, the diff...
Read More
-
Blister Packaging Sealing Material
Oct 28 , 2021
The sealing materials (also called lid materials) for pharmaceutical blister packaging in China all use aluminum foil (PTP aluminum foil) with a common thickness of 0.02mm, which requires mold-free, corrosion-resistant, impermeable, solar heat, moisture-proof, light-blocking and high-temperature extinction. The performance of bacteria. Looking at the international PTP packaging market and the deve...
Read More
-
The Operation Problem Of The Aluminum-Plastic Packaging Machine
Oct 28 , 2021
Some technologically advanced aluminum-plastic blister packaging machines are equipped with various automatic monitoring devices, which can play various protective functions and automatically stop the operations of this blistering machine when the following problems are found: (1) Strictly check that the safety cover of the blister packaging machine is opened; (2) Strictly check whether the compre...
Read More
-
Working Characteristics Of Blister Packaging Machine
Oct 28 , 2021
Flat-plate blister packaging machine operation process and working method: the molded plastic sheet is heated to a softened and plastic state at the flat-type preheating and disassembly, and is hauled by step-by-step disassembly to the flat-plate molding and disassembly, shortening the air to blow the softened hard plastic sheet (Or stamping and blow molding) into a blister, filling and disassembl...
Read More
-
Safety Of Blister Packaging
Nov 09 , 2021
An important issue that currently attracts attention in pharmaceutical packaging is how to reduce accidents caused by children's exposure to drugs or misuse of drugs. Statistics show that 30% of child deaths in many countries are caused by mistakenly ingested drugs. There are even a lot of governments even more legislation to control all blister-packaged drugs, because the packaging of such drugs ...
Read More