tablet counting machine

More Scientific To Keep The Tablet Press In Stock

Mar 28, 2022
Tablet press lamination refers to two sheets stacked into one. Due to sticking or curling of the upper punch, the tablet sticks to the upper punch. At this time, the granules are filled into the die hole and pressed again to form a laminated tablet. At the same time, the particles are added into the die hole and repeatedly pressurized. Pressing into lamination makes the tablet press vulnerable to damage. It is necessary to solve the problem of sticking and punching, match the punch, improve the performance of the die, and eliminate the failure of the tablet press.

The reasons and treatment for loose tablets in the tablet press are as follows: Loose tablets refer to the fact that after the tablet is pressed, the hardness is not enough, the surface is numb, and it is broken when lightly pressed with fingers.


China Tablet Press


Not enough pressure. Solution: Increase the pressure. However, for some special-purpose large tablets that require higher pressure, and the pressure requirements reach the upper limit of the pressure of the tablet press or exceed the upper limit of the pressure, it is necessary to customize a tablet press with a corresponding specification of high pressure. The pressure time is too small and the speed is too fast. Correspondingly prolong the pressure time, increase the preload, and reduce the speed.

The punching length of the multi-punch tablet machine is uneven. Solution: Adjust the punch. The active punch is loose. Tighten. The fineness of the medicine is not enough, the content of fibrous or elastic medicine or oil is high and the mixing is not uniform. It can be overcome by crushing the drug through a 100-mesh sieve, selecting a more viscous adhesive, appropriately increasing the pressure of the tablet press, and adding an oil-based drug absorbent to mix thoroughly.
Leave A Message
Leave A Message
Please tell us your requirements such as product, model, speed, etc. We will contact you immediately and give you equipment information and quotation。

Service Online

WhatsApp

Email