-
How to Solve the Problem of Dust in the Tableting Process
Jul 15 , 2022
How to solve the problem of dust in the tableting process of powder Rotary tablet press. The following is a discussion of dust issues during tablet molding. 1. Analysis of the cause of dust: At present, the dust generated in the production and operation of high-speed rotary tablet press machine and screening machines in mainland China is generally removed by using a special vacuum cleaner to provi...
Read More
-
How To Sterilize The Capsule Filling Machine Before Use
Jul 22 , 2022
We Rich Packing Pharmaceutical and Packing Machinery Company recommend that the capsule filling machine should be sterilized before use to ensure that the production requirements of GMP are met. The number of sterilizations in each round is sterilization before capsule filling production and sterilization after maintenance work is completed. The disinfection capsule fillingtools used in the p...
Read More
-
What Are The Ways To Reduce Dust In Tablet Presses
Jul 22 , 2022
Introduction How can you effectively reduce dust in tablet presses to ensure a safer, cleaner, and more compliant pharmaceutical manufacturing environment? This article explores essential strategies, from formulation adjustments to advanced equipment and operational controls, providing actionable insights to tackle this critical challenge head-on and protect both product and personnel. &nbs...
Read More
-
Technological Progress Of Tablet Press Machinery High-Speed
Jul 22 , 2022
With the continuous and the rapid developing of China's social economy and the GDP, pharmaceutical manufacturer have also developed intensively. So, in order to meet the needs of the pharma field industry, the original old type presses with an output of only 20,000 to 50,000 one hour can no longer meet the needs of the market. So , Guangdong Rich Packing Packing Machinery Co., Ltd. has accumulated...
Read More
-
Mould Replacement And Synchronous Adjustment Of Blister Packaging Machine
Jul 29 , 2022
Replacement of blister board-mounted molds: When the packaging shape changes, that is, when the quantity, size, variety and specifications of the packaging plate change, the molds and corresponding parts need to be replaced. The general steps for replacing the mold and the corresponding parts are: turn off the heating switch, cut off the water and gas sources, and turn all the switch knobs to the ...
Read More
-
How To Properly Lubricate And Maintain The Tablet Press
Aug 04 , 2022
How to properly lubricate and maintain the tablet press requires more attention: (1) The lubrication of the friction surfaces of the moving parts of the rotary tablet press is an important link to ensure the normal operation of the machine and prolong its service life, especially if the main moving parts run dry in the absence of oil, they will be quickly damaged and cannot be used. . (2) Before u...
Read More
-
How To Adjust The Cam Of Blister Packing Machine?
Aug 04 , 2022
What is the installation sequence of the valve cam of the blister packaging machine on the shaft? First, from the inside to the outside, it is the traction and clamping cylinder cam, the back-stop cylinder cam, the forming blowing cam and the forming cylinder cam. When the return position of the heat sealing cam linkage heat sealing mold is very low, the valve cam is installed according to the pos...
Read More
-
What Are The Feeding Methods Of The Tablet Press
Aug 12 , 2022
Introduction to Tablet Press Feeding Systems Tablet presses are sophisticated machines at the heart of pharmaceutical manufacturing, transforming powder mixtures into precisely formed tablets. While compression mechanisms often receive the most attention, the feeding system is equally critical—it's responsible for delivering the correct amount of material to the die cavity before compression...
Read More
-
What To Prepare Before Operating The Tablet Press
Sep 02 , 2022
After the mold of the tablet press is installed, turn the steering wheel by hand to make the steering wheel turn 2-3 times, and observe the abnormal friction noise of the upper and lower impact rods on each track and each hole. Turn on the main power switch, the power indicator light is on, and the speed is 0. Press the vacuum cleaner start button, the vacuum cleaner running indicator lights up. N...
Read More
IPv6 network supported 
Home
Products