-
Causes Of Dust In Rotary Tablet Press
Aug 16 , 2021
The primary task of the rotary tablet press is the continuous three-step sequence of filling, pressing, and discharging. The granular materials fall into the feeder through the hopper, and rely on the weight of the materials or are forced to fall into the hole of the middle mold. The lower punch and upper rail guide pushes the pressed sheet out of the middle die hole, and then flows into the sheet...
Read More
-
Rotary Tablet Press Is More Perfect To Install Dust Collector
Aug 16 , 2021
Vacuum installation: 1 External vacuum cleaner Rotary tablet presses generally use external vacuum cleaners to collect dust. They are mainly divided into mechanical dust collectors, wet dust collectors, electrostatic dust collectors, and filter dust collectors. However, mechanical dust collectors are commonly used. A vortex pump is used for dust collection. The mission principle of the vortex air ...
Read More
-
The Die Structure Of The Tablet Press
Sep 24 , 2021
The die is a tablet press die that suppresses the tablet. The task end faces of the upper and lower punches constitute the appearance of the tablet, and the aperture of the middle die is the diameter of the tablet. The punch die is the primary mission element of the tablet press RQ-ZP. Most of pairs of punching dies contain the three parts: as the upper punch, middle die, and these lower punch. Th...
Read More
-
The Structure Of The Forced Feeder Of The Tablet Press
Sep 24 , 2021
The forced feeder structure of the compulsory feeder in tablet press mainly includes three parts, and each part is analyzed as follows: (1) The power conversion part, whose function is to convert the one-way rotation of the output shaft of the geared motor into the reverse rotation of the material shifting impeller, that is, the relative rotation of the two impellers, to transport the materia...
Read More
-
The Problem Of The Splicing Table Of The Blister Packaging Machine
Oct 28 , 2021
The splicing table of the blister packaging machine is the docking station for PVC. At the same time, the splicing table has two cylinders to control the release and shutdown protection of the PVC. When the clamping cylinder is released, the forming step is pulled; when the clamping cylinder clamps the PVC Then the forming traction reaches the end of the traction; the third function of the splicin...
Read More
-
Working Characteristics Of Blister Packaging Machine
Oct 28 , 2021
Flat-plate blister packaging machine operation process and working method: the molded plastic sheet is heated to a softened and plastic state at the flat-type preheating and disassembly, and is hauled by step-by-step disassembly to the flat-plate molding and disassembly, shortening the air to blow the softened hard plastic sheet (Or stamping and blow molding) into a blister, filling and disassembl...
Read More
-
Application of PLC Control in Blister Packaging Machine
Nov 19 , 2021
The traction part of the capsule blister packaging machine is controlled by PLC. The calculation shows that the working stroke of the cam at the blister forming part and the heat-sealing part is; the stroke movement time is 0.5 seconds, the far rest time is 1.5 seconds, the return movement time is 0.5 seconds, and the near rest The time is 0.5 seconds. When the forming and heat sealing part of the...
Read More
-
Production Clearance of Blister Packaging Machine
Nov 19 , 2021
After the first production of the blister packaging machine, the post operator replaces the batch number record, and the person in charge of the post is responsible for notifying the outsourcing to change the batch. The packaging work of the next batch number can only be carried out when it is confirmed that the outer packaging position has been completed. The blister packaging machine workshop wi...
Read More
-
The Trend of Blister Packaging Equipment
Nov 19 , 2021
Our country is a developing country with a large population. National conditions determine that most of our pharmaceutical companies' blister packing machine products are produced in large quantities. In addition, domestic pharmaceutical companies that survive the gradual survival of the fittest in recent years must have their own core products. Under normal circumstances, the output of core produ...
Read More