Our Guangdong RICH PACKING tablet press is an automatic continuous production equipment that presses granular materials into round, special-shaped, and text, symbols, and graphics tablets with a diameter of not more than 50 mm. In some pharmaceutical tablet presses, burrs and dust can be selected when the tablet is compressed, and the matching sieving machine can be selected for connection and dust removal at the same time. Above is the description of the use of the tablet press. Below, please come to understand its production principle and work flow.
Control of the tablet dosage of the tablet press. Various tablets have different dosage requirements. Large dosage adjustment is achieved by choosing punches with different punch diameters, such as 6 mm, 8 mm, 11.5 mm, 12 mm and other punches. After the die size is selected, the small dosage adjustment is to adjust the depth of the lower punch into the middle die hole, thereby changing the actual length of the middle die hole after the bottom seal, and adjusting the filling volume in the die hole.
Therefore, there should be the mechanism for adjusting the original positioning of the lower dies in the die hole on the tablet press machinery to meet the dosage adjustment requirements. As different batch numbers always have specific volume differences, this adjustment function is very necessary.