Candy tablet press machine is an automatic rotary continuous tablet press machine, widely used in food, pharmaceutical, chemical, ceramics, electronics, plastics and powder metallurgy industries, suitable for pressing various granular raw materials into tablets, not suitable for semi- Solid, moist molecules and particle-free ultra-fine powder compaction.

The manufacturing mechanism of compressed candy is mainly the process of reducing the distance of particles or fine powders to produce sufficient cohesion and close combination by pressure. The contact area between loose particles is small, the distance is large, and there is only cohesion within the particle, but no adhesion between particles. There are large gaps between the particles, and the gaps are filled with air. After pressurization, the particles slide and squeeze tightly, the distance and gap between the particles gradually shrink, the air is gradually discharged, some particles or crystals are crushed, and the fragments are pressed and filled into the gap. When a certain pressure is reached, the particles are close to a certain degree. The attractive forces between the molecules are sufficient to combine the particles into an overall sheet.

How to do the daily inspection of the candy tablet press? Check the parts regularly. The inspection part mainly includes whether the worm, bearing, pressure wheel, upper and lower guide rails and other parts are flexible and worn. If any defects are found, they should be repaired in time. After one use, the remaining powder should be taken out, and the residual powder in each part of the machine should be brushed off. If the machine is not used for a long time, all dies must be removed, and the smooth surface of the machine parts should be coated with anti-rust oil and covered with a mask.