The Steps Of Customizing The Pressing Target Of The Tablet Pressing Die-richpacking020.com

Blog

Tags

The Steps Of Customizing The Pressing Target Of The Tablet Pressing Die

Mar 28, 2022

The tableting mold can be used to produce xylitol, so that the production of xylitol can be produced in an assembly line, and the income of benefits is increased. The dust generated in the process of material conveying and reversing of the tablet press mold may also leak directly from the relevant joints to the purification area. For the evaluation of tablet quality, the tablet press die is still the main indicators of tablet strength, disintegration, dissolution and weight difference.

Tablet die is an important part of tablet press, also known as tablet press die in the industry. A pair of tablets pressing molds are divided into three parts: upper punching die, middle punching die and lower punching die. The manufacturer of the customized tablet pressing mold will analyze and introduce the steps of the customized pressing target of the tablet pressing mold:

1. Place the base of the tablet pressing die in the center of the lower pressing plate of the tablet pressing machine. The function of the pressing rod: when pressing down, the lower pressing plate will move up. The function of the knob: when pressing the tablet, the knob of the tablet pressing die It must be tightened, if you want to release the pressure, loosen the knob;

2. Put the component on the base, and then put the component into the hole of component 1 (note: the flat head of component 3 is facing up, and make sure that the customized component 3 of the infrared tablet pressing mold falls on the bottom of component 1).

3. Pour the powder to be pressed into the component, then put the cylinder of the component into the component, and rotate the component. The purpose is to avoid unevenness in the tableting die, which will lead to uneven pressure on the target. , and then place the combination of the two components on the base, and then you can start pressing the target.

4. Off-target action: After pressing the target, turn the knob to release the pressure, release the pressure of the tableting die to the height suitable for placing the component again, or lower the lower pressure plate to the bottom, and then place the component in the combination product in step 3 Next, use the infrared tablet pressing mold to press the protruding part to a close contact, and then perform a pressure relief action to remove each object, and you can see that the target falls on the base.

Rich Packing Pharmaceutical & Packing Machinery Provide Door-To-Door Overseas Service, All Products In Stock, Guaranteed For 3 Years! Free Maintenance For Life time!

Contact & Advisory
Email : manager@richpacking.cn
WeChat & Whatsapp & Line
+8613826093596
Address
Building D, No. 226, Beishan Qiaotou Street, Haizhu District, Guangzhou City,Guangdong Province,China

Follow Us

Hot Tags

Leave A Message

Social icons :

IPv6 network supported

Intelligent Test Strip Detection Paper Reagent Cartoning Machine

The Necessity Of Checking The Tablet Press