-
Technical Innovation Of Counting Machine
Jul 23 , 2021
The earliest bottles of medicine and candy were counted manually. At that time, a traditional tool called counting board was used to count manually. It is conceivable how unsanitary and laborious this is. Until the 1970s, electronic capsule counting and bottling machine appeared in Europe, which is a small electronic capsule counting and bottling machine, which began the automation era of capsule ...
Read More
-
Troubleshooting And Solutions Of Capping Machine In Counting Machine Line
Aug 09 , 2021
Capping machine in counting machine line is mainly used to tighten and loosen the caps of plastic bottles, glass bottles, etc. Capping machine is widely used. It is a very common packaging machine. It is usually connected with tablet counting machine. With the gradual tightening of market packaging and the gradual diversification of packaging styles, people also put forward higher requirements for...
Read More
-
Causes Of Dust In Rotary Tablet Press
Aug 16 , 2021
The primary task of the rotary tablet press is the continuous three-step sequence of filling, pressing, and discharging. The granular materials fall into the feeder through the hopper, and rely on the weight of the materials or are forced to fall into the hole of the middle mold. The lower punch and upper rail guide pushes the pressed sheet out of the middle die hole, and then flows into the sheet...
Read More
-
Rotary Tablet Press Is More Perfect To Install Dust Collector
Aug 16 , 2021
Vacuum installation: 1 External vacuum cleaner Rotary tablet presses generally use external vacuum cleaners to collect dust. They are mainly divided into mechanical dust collectors, wet dust collectors, electrostatic dust collectors, and filter dust collectors. However, mechanical dust collectors are commonly used. A vortex pump is used for dust collection. The mission principle of the vortex air ...
Read More
-
Parameter Setting Factors Of Capsule Counting Machine
Aug 24 , 2021
Some factors that affect the parameter setting of the capsule and tablet counter: ①The size of the outlet of the material silo has a great influence on the separation state of the material on the vibration plate. If the opening is too large, it will directly affect the amount of material flowing out and the speed is too fast, so it is not that the larger the opening, the faster the counting speed....
Read More
-
The Problem Of The Splicing Table Of The Blister Packaging Machine
Oct 28 , 2021
The splicing table of the blister packaging machine is the docking station for PVC. At the same time, the splicing table has two cylinders to control the release and shutdown protection of the PVC. When the clamping cylinder is released, the forming step is pulled; when the clamping cylinder clamps the PVC Then the forming traction reaches the end of the traction; the third function of the splicin...
Read More
-
Working Characteristics Of Blister Packaging Machine
Oct 28 , 2021
Flat-plate blister packaging machine operation process and working method: the molded plastic sheet is heated to a softened and plastic state at the flat-type preheating and disassembly, and is hauled by step-by-step disassembly to the flat-plate molding and disassembly, shortening the air to blow the softened hard plastic sheet (Or stamping and blow molding) into a blister, filling and disassembl...
Read More
-
Application of PLC Control in Blister Packaging Machine
Nov 19 , 2021
The traction part of the capsule blister packaging machine is controlled by PLC. The calculation shows that the working stroke of the cam at the blister forming part and the heat-sealing part is; the stroke movement time is 0.5 seconds, the far rest time is 1.5 seconds, the return movement time is 0.5 seconds, and the near rest The time is 0.5 seconds. When the forming and heat sealing part of the...
Read More
-
Production Clearance of Blister Packaging Machine
Nov 19 , 2021
After the first production of the blister packaging machine, the post operator replaces the batch number record, and the person in charge of the post is responsible for notifying the outsourcing to change the batch. The packaging work of the next batch number can only be carried out when it is confirmed that the outer packaging position has been completed. The blister packaging machine workshop wi...
Read More