-
The Composition Of The Blister Packaging Machine Depends On These Four Parts
Dec 22 , 2021
The blister packaging machine is a machine that forms a blister with a transparent plastic film or sheet, and seals the product between the blister and the bottom plate by means of heat sealing, bonding, etc. The composition of the blister packaging machine: The blister packaging equipment for medicines is basically similar to the blister packaging equipment for other products, and mainly consists...
Read More
-
Production Process Of Tablet Press
Dec 28 , 2021
The tablet press can be used in the pharmaceutical, food, chemical industries and other industries, and can compress the powder with tableting properties into various types of tablets, such as round, ring, and other special-shaped tablets. The torsion tablet press has a more ideal effect on the processing of Chinese medicine, and it only needs to be filled with the mind opener. In the Chinese medi...
Read More
-
How Does The Tablet Press Control The Tablet Weight
Dec 28 , 2021
Increase in tablet weight difference: In the process of adding tablets, the difference in weight cannot exceed the level stipulated in the pharmacopoeia to pass, but in the process of compression, it is often found that the difference in tablet weight increases. The reasons for the treatment are as follows: (1) Uneven punch length: It is easy to cause an increase in film weight difference, so use ...
Read More
-
How To Solve The Dust Problem Of The Tablet Press Machine
Jan 06 , 2022
There is a dust problem in the tablet press process, which is a problem that needs to be solved urgently. Nowadays, domestic high-speed torsion tablet presses and screens produce dust during production and operation, and vacuum cleaners are generally used to supply negative pressure to remove the dust. One of the primary reasons for the contamination of tablet presses is that the lubrication syste...
Read More
-
Reasons For Insufficient Tablet Hardness And Solutions
Jan 06 , 2022
In the daily operation of the tablet press, we will inevitably encounter that the compressed tablets are not hard enough, which is a very distressing thing. Below we analyze the reasons and solutions that lead to the lack of hard compression. (1) Reason: The amount of binder or lubricant is small or inappropriate, resulting in uneven particle distribution, and layering of coarse and fine particles...
Read More
-
How Much Do You Know About Tablet Press?
Jan 06 , 2022
The tablet press is an automatic continuous production equipment for pellets that are not more than 50mm in diameter, round, special-shaped, and tablets with text, symbols and graphics. Some pharmaceutical tablet presses have burrs and dust during tablet compression and should be equipped with a sieve machine to remove dust at the same time (more than two times), because it must meet GMP specifica...
Read More
-
How To Adjust The Mold Of The Food Tablet Press Machine?
Jan 06 , 2022
The tablet press is one of the important equipment in the pharmaceutical field to process granular raw materials into tablets or granules. The food tablet press is equipped with a mold. The filling depth of the material and the thickness of the tablet can be adjusted. It can press various special-shaped and round digital plates, as well as digital plates with trademarks, text, and simple graphics ...
Read More
-
The Structure And Principle Characteristics Of High-Speed Tablet Press
Jan 06 , 2022
Our RICH PACKING high-speed tablet press is a machine that uses punching force to form powder with a turntable speed of more than 80R/Min. The rotation of the main shaft drives the pressure plate fixed at the upper and lower ends of the main shaft to rotate. The punch on the turntable is restrained by the upper and lower guide rails. Material forming is more than 3 times the production efficiency ...
Read More
-
How To Solve The Problem Of Too Much Fine Powder In The Ring-Type Rotary Tablet Press?
Jan 06 , 2022
The shape of the tablet of the ring-type rotary tablet press was mostly oblate at first, and later developed into a shallow arc and a deep arc on the upper and lower sides, which requires coating. With the development of special-shaped tablet presses, tablets with oval, triangular, elliptical, square, diamond and ring shapes have been produced. In addition, with the continuous development of the f...
Read More