-
Heat Sealing Precautions For Blister Packing Machine
Feb 14 , 2022
In the hot-pressing sealing process of the drum-type aluminum-plastic blister packaging machinery, the PVC tape and aluminum foil are hot-pressed by the roller-shaped heat-sealing rollers and anilox rollers parallel to each other under the action of a certain temperature and pressure for meshing counter-rolling. sealed. The contact between heat-sealing roller and the anilox roller is linear, and t...
Read More
-
Analysis Of Common Faults In The Operation Of Cartoning Machine (1)
Feb 10 , 2022
Cartoning machine is kind of packaging machinery, there are vertical cartoning machine and horizontal cartoning machine. The cartoning machine automatically loads the materials and instructions such as medicine bottles, medicine boards, ointments and sachets into the folding carton, and completes the action of covering the box. Additional functionality for shrink wrapping. A. Conveyor belt gap sto...
Read More
-
Parts Of The Tablet Press (2)
Feb 10 , 2022
The components of the rotary tablet press of our Guangdong Rich Packing Machinery Co., Ltd. include the following parts: Tablet thickness and pressure adjustment parts of tablet press By adjusting the upper and lower distance of the lower pressure wheel, the thickness of the film (actually it is also the pressure) is adjusted. The pressing wheel is installed in the groove of the main body of the m...
Read More
-
Parts Of The Tablet Press (1)
Feb 10 , 2022
The tablet press of our Guangdong Rich Packing Machinery Co., Ltd. is composed of the following parts: Tablet press turntable, or turntable The machine turntable is the main part of the operation of the tablet press, mainly composed of upper and lower bearing assemblies, main drive shaft, turntable and other main parts. The main shaft is supported on the bearing, and the worm gear is responsible f...
Read More
-
How To Solve The Problem Of Too Much Fine Powder In The Ring-Type Rotary Tablet Press?
Jan 06 , 2022
The shape of the tablet of the ring-type rotary tablet press was mostly oblate at first, and later developed into a shallow arc and a deep arc on the upper and lower sides, which requires coating. With the development of special-shaped tablet presses, tablets with oval, triangular, elliptical, square, diamond and ring shapes have been produced. In addition, with the continuous development of the f...
Read More
-
The Structure And Principle Characteristics Of High-Speed Tablet Press
Jan 06 , 2022
Our RICH PACKING high-speed tablet press is a machine that uses punching force to form powder with a turntable speed of more than 80R/Min. The rotation of the main shaft drives the pressure plate fixed at the upper and lower ends of the main shaft to rotate. The punch on the turntable is restrained by the upper and lower guide rails. Material forming is more than 3 times the production efficiency ...
Read More
-
How To Adjust The Mold Of The Food Tablet Press Machine?
Jan 06 , 2022
The tablet press is one of the important equipment in the pharmaceutical field to process granular raw materials into tablets or granules. The food tablet press is equipped with a mold. The filling depth of the material and the thickness of the tablet can be adjusted. It can press various special-shaped and round digital plates, as well as digital plates with trademarks, text, and simple graphics ...
Read More
-
How Much Do You Know About Tablet Press?
Jan 06 , 2022
The tablet press is an automatic continuous production equipment for pellets that are not more than 50mm in diameter, round, special-shaped, and tablets with text, symbols and graphics. Some pharmaceutical tablet presses have burrs and dust during tablet compression and should be equipped with a sieve machine to remove dust at the same time (more than two times), because it must meet GMP specifica...
Read More
-
Reasons For Insufficient Tablet Hardness And Solutions
Jan 06 , 2022
In the daily operation of the tablet press, we will inevitably encounter that the compressed tablets are not hard enough, which is a very distressing thing. Below we analyze the reasons and solutions that lead to the lack of hard compression. (1) Reason: The amount of binder or lubricant is small or inappropriate, resulting in uneven particle distribution, and layering of coarse and fine particles...
Read More