ZP 51/99D High Speed Rotary Tablet Press Machine

ZP 51/99D High Speed Rotary Tablet Press Machine of Rich Packing

This ultra-high-speed rotary tablet press has high pressure and can compress tablets of various shapes, such as ordinary, irregular, and ring shapes. The turntable can be equipped with 51 to 99 punching dies. The rotating speed of the turntable is 4 times that of the ordinary model, and the ordinary speed is 20 revolutions per minute. Our ZP51-99D can reach up to 80 revolutions per minute. The maximum output can be 99 tablets after one rotation, which is especially suitable for the production of large pharmaceutical and food factories.
Installation knowledge of the die of the rotary tablet press: Before the die device, first remove the hopper, powder feeder, feeder frame and other parts, and wipe the working surface, die hole and the installed die of the turntable one by one. Get ready, follow the steps below to install.
First, align the middle mold fixing screws on the turntable one by one with the outer circle of the turntable horizontally. The middle mold device is very tight and should be flat when placed. The middle mold punch (provided tool) can be used to punch through the upper hole for lightly hammering. enter. Then check that the head of the upper mold enters the middle mold up and down and rotates flexibly. There must be no hard rubbing to be qualified. After all are installed, the tongue should be pulled down. Open the small door on the main body and install it from the round hole of the main body. The installation method is the same as that of the upper punch. After the installation is completed, the disc must be flat; after all the punching dies are set, let the machine run empty for 2-3 minutes, stable It can be put into production normally.
The biggest feature of our ZP51/PPD rotary tablet press is that it can control the average tablet weight error of tablets to within 2%. The finished product export is also equipped with a waste rejection system, so that the actual utilization rate of the material exceeds 99%, and the finished product is correct. The rate reaches 100%.

***  Technical parameter